---------MK20-MK20V2_2026_11 17 V88------------ CN: 新增与优化 优化界面渲染架构,优化EQ界面,参数更易辨认。 新增MIDI CC42~44现分别控制CTRL 1~3,跟随当前预设的参数映射,并优化连续发码响应。优化NAN模型显示,增加红色主题及模型类型标识,试听名称显示为PC NAN。 BUG修复 修复连续试听或替换同一位置模型后,名称、图标和参数未及时刷新的问题。修复通过上位机恢复全局出厂设置后,重启可能回到原设置的问题。 修复了一些已知的BUG。 EN: New Features & Improvements Optimized the UI rendering architecture and refined the EQ interface for better parameter readability. Added MIDI CC 42–44, now controlling CTRL 1–3 respectively, following the parameter mapping of the current preset; improved continuous CC response performance. Enhanced NAN model display: added a red theme and model type indicator; audition names now displayed as "PC NAN". Bug Fixes Fixed an issue where model name, icon, and parameters were not refreshed promptly after continuous auditions or replacing a model in the same slot. Fixed an issue where restoring factory default settings via the host software might revert to previous settings after reboot. Fixed various other known bugs. ---------MK20_2026_10 19 V86------------ CN: 新增功能 新增Global BPM全局节拍设置,支持40~240 BPM调节、Global Sync全局同步及外部MIDI Clock联动。 Global BPM设置独立保存,切换普通预设或快照时保持全局节拍设置;关闭Global Sync后恢复原预设及 鼓机同步规则。 BUG修复 修复WHAMMY的Oct2模式在Bend达到约80后变调失效的问题。 修复选择Pattern单声道延时效果时可能导致设备卡死的问题。 修复普通Comp压缩效果对弱音及尾音产生额外门限衰减的问题。 修复开启Drum Sync后,上位机/APP与机身鼓机BPM显示不一致、调整后数值回弹的问题。 修复通过机身与上位机调整鼓机音量时,实际音量不一致的问题。 修复部分延时及调制效果切换Sync后,速度或时间参数的映射范围错误、已设置范围被重置的问题。 修复延时同步中1/32D节奏细分的时间偏差。 完善快照及其全局设置的保存失败处理,保留待重试状态,避免写入失败被误判为保存成功。 修复界面资源不足或全局参数异常时,切换部分效果页及设置页可能发生异常的问题。 修复更多已知的bug。 EN: New Features Added Global BPM setting, adjustable from 40 to 240 BPM, with Global Sync and external MIDI Clock support. Global BPM settings are saved independently — switching presets or snapshots preserves the global tempo setting. When Global Sync is turned off, the original preset and drum machine sync rules are restored. Bug Fixes Fixed an issue where the WHAMMY Oct2 mode's pitch shift would stop working when Bend reached approximately 80. Fixed an issue where selecting the Pattern Mono delay effect could cause the device to freeze. Fixed an issue where the standard Comp compression effect applied excessive gating/attenuation to quiet notes and note tails. Fixed an issue where the drum machine BPM display was inconsistent between the host software/app and the device itself when Drum Sync was enabled, and where adjusting the value would snap back. Fixed an issue where the actual drum machine volume differed when adjusted via the device vs. the host software. Fixed an issue where switching Sync on some delay and modulation effects caused incorrect mapping ranges for rate/time parameters and reset previously set ranges. Fixed timing deviation for the 1/32D note subdivision in delay sync. Improved handling of save failures for snapshots and global settings — a "pending retry" state is now preserved, preventing failed writes from being incorrectly reported as successful saves. Fixed an issue where switching to certain effect pages and settings pages could cause errors when interface resources were insufficient or global parameters were abnormal. Fixed various other known bugs. ---------MK20_2026_10 08 V85------------ CN: BUG修复: 修复部分普通预设在上位机保存不生效的问题。 修复预设交换后保存不完整,以及最后一个预设、快照无法正常交换的问题。 修复WHAMMY与上位机状态不同步,刷新后回退为WAWAHWAWAH的问题。 修复开机动画尚未结束就有吉他声音输出的问题。 EN: Bug Fixes: Fixed an issue where saving certain normal presets via the host software had no effect. Fixed an issue where presets were saved incompletely after being swapped, and where the last preset and snapshot could not be swapped properly. Fixed an issue where the WHAMMY state was out of sync with the host software, reverting to WAWAHWAWAH after a refresh. Fixed an issue where guitar audio was output before the boot animation had finished. ---------MK20_2026_09 28 V84------------ CN: 1、BUG 修复: 修复部分旧快照升级后无法进入或自动退出的问题。 修复部分旧预设因模型数据缺失而调用失败、自动跳回的问题。 修复上位机保存快照不生效,切换快照或重启后修改丢失的问题。 2、USB 连接优化:优化 USB MIDI 重连处理,修复连接异常的问题。 EN:1、Bug Fixes Fixed an issue where some old snapshots could not be entered or would automatically exit after upgrading. Fixed an issue where some old presets failed to load and automatically jumped back due to missing model data. Fixed an issue where saving a snapshot from the host PC software did not take effect, and changes were lost after switching snapshots or restarting the device. 2、USB Connectivity Improvements Optimized USB MIDI reconnection handling and fixed connection-abnormality issues. ---------MK20_2026_09 24 V83------------ CN: 1、【音色与建模】 新增 NAM A2 原生支持 新增 12 款 MW 系列正向建模失真效果 2、【尾音控制】 延迟、混响可独立设置尾音溢出 支持关闭 / 自动 / 强制同步三种模式 3、【降噪优化】 降噪模块新增 Detect 参数,可选择侦测源,让链路构建更灵活 优化降噪算法,提升降噪使用体验 4、【界面焕新】 升级字体、图标及效果链显示 新增 MW / NAM 专属主题 EN: 1. 【Tone & Modeling】 Added native support for NAM A2 Added 12 MW-series forward-modeling distortion effects 2. 【Tail Control】 Independent tail spillover settings for delay and reverb Three sync modes: Off / Auto / Force 3. 【Noise Reduction Improvements】 New Detect parameter in the noise gate module, letting you choose the detection source for more flexible signal-chain routing Optimized noise-reduction algorithm for a better user experience 4. 【UI Refresh】 Upgraded fonts, icons, and effects-chain display Added dedicated themes for MW / NAM ---------MK20_2026_08 24 V82------------ CN 修复了DLY打开SYNC的时候time一直为1/4,调节不了的状态 EN Fixed an issue where the Time parameter in DLY remained stuck at 1/4 and could not be adjusted when SYNC was enabled. ---------MK20_2026_08 14 V81------------ CN: 音频体验:效果切换更顺滑,修复立体声、低音量伴奏、主音量杂音及偶发无声问题。 踏板控制:新增 Pedal Sync 与全局映射,并加强开机稳定、校准保护和无效映射提示。 新增功能:加入 INPUT GAIN、ECO 省电模式,以及 Gojira Whammy 踏板连续变调。 显示与连接:升级峰值/削波显示,并改善蓝牙、USB 伴奏和编辑器同步体验。 注意:更新前请备份你的音色,更新后如果重新升级回老固件会丢失你的音色。 EN: Audio Experience: Smoother effect switching, with fixes for stereo output, low-volume accompaniment, main audio noise, and occasional audio dropouts. Pedal Control: Added Pedal Sync and global mapping, along with enhanced boot-up stability, calibration protection, and invalid mapping alerts. New Features: Added INPUT GAIN, ECO power-saving mode, and continuous pitch shifting for the Gojira Whammy pedal. Display & Connectivity: Upgraded peak/clipping indicators, and improved Bluetooth, USB audio playback, and editor synchronization. Note: Please back up your presets before updating. If you roll back to an older firmware version after the update, your presets will be lost. ---------MK20_2026_01 26 V78------------ CN: 修复Bank模式不能正常切换预设 修复LOOP模式右声道不能正常使用 EN: Fix Bank mode unable to switch preset settings properly Fix the malfunction of the right channel in LOOP mode ---------MK20_2025_11 24 V74------------ CN: 修复一个Bug,该Bug曾上位机无法正常执行交换预设操作。 EN: Fixed a bug where the upper computer was unable to perform the exchange preset operation normally. ---------MK20_2025_10 31 V73------------ CN: 1、哇音新增level参数 2、修复了一些bug EN: 1. Add level parameter to wah sound module 2. Fixed some bugs ---------MK20_2025_10 20 V71------------ CN: 1、优化了部分效果 2、增加了开机动画 EN: 1. Optimized some of the effects 2. Added startup animation