---------ELEMENTAL PRO_2026_11 06 V04------------



CN：
新增 MIDI 控制
支持外接 MIDI 踏板切换音色、开关效果、调节参数、踩节拍以及控制冻结和 Ping-Pong 模式。
PC 0～8 始终用于选择 9 种音色；CC3 在普通模式下选择音色，在音符设置模式下选择音符值。
CC14 可直接选择 9 种音符值，数值范围均匀分档，方便外接踏板设置。
优化 MIDI 与旋钮的配合
MIDI 调好的参数会持续保持，切换模式或开关效果不会跳回旋钮位置；转动对应旋钮后，再由旋钮接
管。
退出音符设置模式时保留当前音色。例如使用 Analog 设置好 1/16 后，退出仍为 Analog；转动 KNOB2
才会切换音色。
优化 MOD 调节与 Pattern 切换
调整 Analog 和 Pattern 的 MOD 旋钮响应，让中低旋钮位置的变化更容易听出。
优化 Pattern 节奏档位切换时的过渡，减少突变。

EN：
New MIDI Control Features
External MIDI footswitch support for preset switching, effect on/off, parameter adjustment, tap tempo, and control over freeze and Ping-Pong mode.
PC 0–8 always selects 9 presets; CC3 selects presets in normal mode and selects note values in note setting mode.
CC14 directly selects 9 note values with evenly spaced increments, making it easy to set up with external pedals.
Improved MIDI and Knob Interaction
Parameters adjusted via MIDI are retained — switching modes or toggling effects will not snap values back to the physical knob position. Turning the corresponding physical knob returns control to the knob.
The current preset is preserved when exiting note setting mode. For example, after setting 1/16 with Analog, exiting note setting mode remains on Analog; turning KNOB2 is required to switch presets.
Improved MOD Adjustment and Pattern Switching
Adjusted MOD knob response for Analog and Pattern, making changes more audible at mid-to-low knob positions.
Smoothed transitions when switching Pattern rhythm steps to reduce abrupt changes.